Descripción del Trabajo
Set up and operate automatic wave solder machine to solder multiple connections on printed circuit boards.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
· Operate and maintain foam fluxer, using hydrometer to ensure specific gravity and resin ratio.
· Add/fill bar solder, flux and alcohol to machine as required.
· Clean and adjust the flux density controller (FDC) and fluxer.
· Monitor boards for soldering defects.
· Check components for proper seating and soldering quality.
· Dross the solder pot to remove impurities and performs required maintenance on a daily basis.
· Drain the flux and clean the machine on a weekly basis.
· Maintain inventory of chemical and solder usage.
· Ensure that assigned area is clean and organized.
· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.
· Comply and follow all procedures within the company security policy.
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Read and understand visual aid. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Must be able to calculate quantity of parts to be prepped and ready for use at any time. Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's.
Ability to apply common sense understanding to carry out simple one- or two-step instructions. Ability to deal with standardized situations with only occasional or no variables.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Individual may be required to sit, stand or walk. Reaching, bending, loading, and unloading of boards and reels is mandatory, as is lifting of up to 35 lbs. Specific vision abilities required by this job include close vision and use of microscope and/or magnifying glass.
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located on the manufacturing floor. The noise level in the work environment is moderate.
Successful applicants will have to fulfill all prerequisites for contracts. Certain position may require US Citizenship.